#CALEX MODEL 6255 DRIVER#

Remedy: If this error occurs at installation, the ETB Disengage Member (Transfer Frame Stopper) may be left unremoved.If necessary, replace it.Įngagement of the ETB was not completed at initialization. Check if the link with the Fixing Feed Handle is failed. Check if the drive system (gear, Motor, one-way) is failed. NOTE: Check if the Disengagement Cam is stained. Replace the Duplex Feed Left Motor (M19).

#CALEX MODEL 6255 DRIVER#

Motor side: J2107, J3044 (relay), PCB side: J330 (Duplex Driver PCB (PCB4)) 3. Check the connection of the Duplex Feed Left Motor (M19). Sensor side: J2100, J3270, PCB side: J343 (Duplex Driver PCB (PCB4)) 2. Check the connection of the ETB Disengage Sensor (PS55). If necessary, replace it.Įngagement of the ETB is not completed within the specified period of time. Sensor side: J2101, J3270, PCB side: J343 (Duplex Driver PCB (PCB4)) 2.

Check the connection of the ETB Disengage Sensor (PS56). Replace the Main Driver PCB (PCB2).ĭisengagement of the ETB is not completed within the specified period of time. Check the connection drawer between the Fixing Assembly and the host machine. (When the error is still displayed after replacing the Waste Toner Feed Unit and the Main Driver PCB (PCB2).) Replace the Waste Toner Lock Detection Switch (SW5). Main Controller side: J3050, DC Controller side: J103 4. Check the connection of the Main Driver PCB (PCB2) and the DC Controller PCB (PCB1). Check the connection of the Waste Toner Lock Detection Switch (SW5) and the Main Driver PCB (PCB2).

After removing it, check that the screw can be seen from the outlet of the pipe. If toner overflowed from the Waste Toner Container clogs the outlet of the Waste Toner Pipe, remove the clogged toner. Check the Waste Toner Container and the Waste Toner Container Pipe. The Waste Toner Lock Detection Switch detects locked state 3 times for 200 msec while the Developing Assembly is driven. Description: Error in Waste Toner Feed Screw Lock detection.

Calex model 6255